Window rust

I’ve had a good look at the rear window, specifically, the rust spots which appear to be scattered throughout the frame, pictures below.

I had initially planned on cutting out the rust and then making up a new window frame. But after doing some research, I’ve settled on buying a complete new frame/window from an external supplier.

I will still need to cut out rust so will put up a post on how I went about it.

I’ve gone with a slimline perspex black frame and window. It has a buble outwards. It is 450 Height x 1175 width, with rounded corners.

The cost is AUS $380.00 and will be ready in 4 weeks.

Will let you know how it all goes, hopefully there won’t be any hitches!